How To Set Up Ventilation In Grow Tent

Of class ventilation systems, forth with lighting, are i of two environmental components that are required for your tent, simply we have been getting some questions well-nigh how to prepare a ventilation organisation so nosotros want to put together a guide to help share some ideas. Nosotros'll break this down best we can alongside some pictures to make set upwards like shooting fish in a barrel and then you can get growing!

What Is the Required Equipment?-how to fix up a ventilation system

• An inline fan: An inline fan is a tube-shaped fan that helps push button big volumes of air through a space—measured in cubic anxiety per minute (CFM). It works to ensure plants become fresh air and CO2 while helping control temperature and humidity in an enclosed space.
• A carbon filter: An inline fan usually works with a carbon filter. The main part of a carbon filter is to remove odors. While a carbon filter isn't required, it helps keep your ventilation system clean and it removes smells–1 filter usually lasts a single abound cycle. We would recommend adding information technology to your set up!
• Ducting: Ducting is basically a tube that connects your grow infinite to an exterior space, to channel fresh air to the tent, which is moved with a fan. It is made with aluminum and metal wire and is flexible notwithstanding able to be cutting.

How to set up a ventilation organisation?

Step 1: Tie up the carbon filter belt-how to set up a ventilation arrangement

When yous open the VIVOSUN 6" carbon filter parcel, yous volition receive a carbon filter, a changeable pre-filter, and belts. If you're going to exist using a filter, we wanted to make it easy to fix! The first matter you lot'll need to practice is to check if the pre-filter is on the carbon filter—it'south the white material around the filter. If information technology isn't, exist sure to put that on before hanging up the filter.

• Put one chugalug under the carbon filter; Fold the belt at about 20-25 inches away from the buckle; Brand sure the folded chugalug and the buckle are on the same horizontal line.
• Push button the folded belt through the 2d buckle hole then conversely push it through the first buckle hole; Make certain the belt has been tied upwardly as tightly as possible.
• Repeat to tie upwards the 2d belt.

Step ii: Hang up the carbon filter-how to set up a ventilation system

• Accept off the E pole from the tent; Cross the East pole through the belts you have just tied upward.
• Re-hang the Due east pole back to the tent.
• Don't let the carbon filter lean against anything since this volition reduce ventilation—besides make certain that the filter isn't tilting upwards or down, you'll want to keep information technology horizontal and parallel to the support poles. Just adjust the straps if the filter is tilted.

Step 2.1: Alternative to hanging the filter

• You can besides identify your carbon filter outside the tent. We don't recommend it because it's amend to filter air before information technology enters the inline fan, but it is possible. Your prepare will look a trivial different than what nosotros are outlining in this article. If you lot do decide to place the filter outside the tent, yous can hang it in a similar fashion that you would hang it in the tent or you tin identify it directly on the ground. If y'all do want to place it outside the tent, bank check out this diagram to get an idea of what that could await like:

Step three: Tie upwards the rope hanger-how to set upwards a ventilation arrangement

• We definitely recommend using rope rachet hangers since they make adjusting the fan height very easy. Thread the rope hanger through the base of the inline fan. The adaptable hook should be a little lower than the other side.
• Hook the adjustable hook to the rope on the opposite side of the fan.
• Echo the procedure with the second hanger on the other side of the fan.
• Wrap the longer side rope (the side with a stock-still claw) around the E pole; Claw the rope with the fixed claw.

Step four: Hang upward the inline fan-how to fix up a ventilation system

Every bit you tin see in the pic, there is a yellow push on the adjustable hook—this yellow push button is used to suit the hanging acme of the inline fan. Exist conscientious when yous adjust the height since if you're not supporting the fan while adjusting the height you might drop it. Hold the base of the inline fan with your hands in instance the fan falls off.

When the carbon filter and the inline fan are at the same level, you tin fit the flange of the fan tightly into the carbon filter. We recommend connecting them together with some ventilation tape to make sure the seal is airtight.

Step 4.1: Alternative to Using the Rope Hangers

• Of course, non everyone has rope hangers! You can echo the process with 1/8" thick strings by tying them around the fan.
• Alternatively, you can use bungee cords to attach the fan to the cantankerous confined.
• Another alternative is to utilize cipher ties to attach the fan—this 1 will be a little trickier. On the mounting plate there are four screw holes through which you can thread zip ties, which tin can then exist wrapped around the cross beams.
• Finally, the fan has a mounting bracket attached to it in case yous desire to attach information technology firmly to another surface. If you accept a 2×4 board bachelor and power tools, you can drill spiral holes into a 2×4 that is nailed to a solid structure. Then, you tin hang the fan on screws (only brand sure you tighten the screws so the fan doesn't vibrate off).

Step 5: Connect the ducting with the fan-how to set up a ventilation system

• Ducting comes packaged like a bound without the tension—simply pull information technology to extend it as far as you lot need. If it is too long or you want multiple pieces, you lot tin cut the ducting with scissors and a wire cutter.
• To secure the ducting tightly to your fan, employ a ducting clamp—slide it onto the ducting earlier y'all attach the ducting to the fan, so slide the ducting clamp over the connection point.
• Expect at the ducting clench and you'll see a small screw that you can tighten with a screwdriver or electric drill. Tighten the clench plenty and so that the connection is airtight.
• After these steps are done, you take finished about xc% of your ventilation system setup.

Step 6: Constrict abroad the excess rope-how to set up a ventilation organisation

Obviously you'll have a lot of rope hanging down into your tent. We recommend wrapping the rope around the aforementioned pole you've hung the fan from and and so tucking the end of the rope beneath the wrapped rope. Check out the next diagram for a visual.

Step 7: Hang upward your grow lite-how to prepare up a ventilation system

We're going to assume that yous're using an LED here since most growers have switched to this new tech. After you take finished setting up your ventilation system, you'll need to set up your grow low-cal. All of the VIVOSUN grow lights are also equipped with rope hangers.

Delight note, nosotros do non recommend hanging the grow light before yous've hanged up the ventilation, and considering of the weight it can only exist hung from the F pole (either F pole works), and it should be hung upwards lower than the ventilation system.

Since an LED abound low-cal is much heavier than a carbon filter and an inline fan, we really recommend you use a rope hanger (the adjustable claw side) to connect the hook of the LED starting time and then hang it to the F pole.

Equally we mentioned before, but wrap the excess rope to the F pole to go it out of the way.

Step 8: Adjust the height of your light-how to prepare up a ventilation system

If you lot need to suit the tiptop of your LED, press the xanthous push button and pull the left side of the rope upwardly. Hold the claw of the LED light when you adjust the pinnacle. Bank check out the post-obit diagram for a visual.

That'due south it! This has mainly been focused on the 4×4 abound tent ventilation setup just you tin follow these instructions for any size of tent, of course there will be pocket-sized adjustments.

If you still accept bug with setting up your arrangement, reach out to us on Instagram or Facebook for help!

Subscribe to our newsletter to get 12% off your beginning order and get admission to special offers, monthly giveaways, and to acquire about our newest products before everyone else. And also welcome to get out comments to u.s.a. below! We would honey to hear from yous!

And bring together our Facebook farmer's community for even more exclusive contests and prizes!

Now VIVOSUN App is online! Download and explore more!

You lot may as well like articles well-nigh how to set up a ventilation system:

How Frequently Should I Run My Abound Tent Ventilation

VIVOSUN AeroZesh: Fully Controllable Ventilation

Should I Use Carbon Filters in My Abound Room

The Best Means to Make clean a Carbon Filter in a Grow Room

Source: https://vivosun.com/growing_guide/how-to-set-up-a-ventilation-system/

Share this post